Control Box Guide
Find your specific Reverie control box for troubleshooting.
Hall Sensors - Technology in the lift motor to evaluate the position/stroke length for memory and preset positions. So, memory and preset positions would only work for motors with hall sensors – only applicable for Reverie systems NOT OSO)
JB-MP-208-C1/ECB0208C1/ECB2208C1

Features
- Head & Foot Lift
- Head and Foot Massage
- Internal BTLE(Bluetooth)
- **Has Hall Sensors**
Pairing Instructions
- Press and hold the white light on the control box until it flashes, then release
- Immediately press and hold any button on the remote until the white light on the control box stops flashing.
- Remote is paired. Test remote functions
JB-MP-208-C2/ECB2208C2
-1.jpg?width=512&height=353&name=JB-MP-208-C2(ECB2208C22)-1.jpg)
Features
- Head & Foot Lift
- Head & Foot Massage
- Internal BTLE (Bluetooth)
- White indicator light
- **No hall sensors**
Pairing Instructions
- Press and hold the white light on the control
box until it flashes, then release
- Immediately press and hold any button on
the remote until the white light on the
control box stops flashing.
- Remote is paired. Test remote functions
JB-MP-208-A1/ECB2208A1
.jpg?width=512&height=384&name=JB-MP-208-A1(ECB2208A1).jpg)
Features
- Head & Foot Lift
- Head and Foot Massage
- Extra Lift – Lumbar/Tilt lift
- Internal BTLE(Bluetooth)
- White indicator light
- **Has hall sensors**
Pairing Instructions
- Press and hold the white light on the control
box until it flashes, then release
- Immediately press and hold any button on
the remote until the white light on the
control box stops flashing.
- Remote is paired. Test remote functions
ECB0209A1

Features
- Head & Foot Lift
- Head and Foot Massage
- Extra Lift – Lumbar/Tilt lift.
- Internal BTLE(Bluetooth)
- White indicator light
- Reverie Connect - Wi-Fi feature used with Google Home / Echo Dot (Alexa)
- **Has hall sensors**
Pairing Instructions
- Press and hold the white light on the control
box until it flashes, then release
- Immediately press and hold any button on
the remote until the white light on the
control box stops flashing.
- Remote is paired. Test remote functions
JB-MP-208-E1/ECB2208E1

Features
- Head & Foot Lift.
- Internal BTLE (Bluetooth)
- White indicator light
- **Has hall sensors**
Pairing Instructions
- Press and hold the white light on the control
box until it flashes, then release
- Immediately press and hold any button on
the remote until the white light on the
control box stops flashing.
- Remote is paired. Test remote functions
JB-MP-208-E2/ECB2208E2
Features
- Head & Foot Lift.
- Internal BTLE (Bluetooth)
- White indicator light
- **No hall sensors*
Pairing Instructions
- Press and hold the white light on the control
box until it flashes, then release
- Immediately press and hold any button on
the remote until the white light on the
control box stops flashing.
- Remote is paired. Test remote functions
ECB2208G1
Features
- Head (2x) & Foot Lift.
- Internal BTLE (Bluetooth)
- White indicator light
- **Has hall sensors**
Pairing Instructions
- Press and hold the white light on the control
box until it flashes, then release
- Immediately press and hold any button on
the remote until the white light on the
control box stops flashing.
- Remote is paired. Test remote functions
JB-MP-108

Features
- Head & Foot Lift Motor
- Head & Foot Massage Motor
- Fuse - Provides overcurrent protection of an electrical circuit
- External BTLE (AM-BT-110)
- Internal Power supply
- Red Light indicates power
- Green light is for pairing
- 108’s Can be converted into 2208/209’s with converter cables and the power supply kit
Pairing 108
- Press the learn button for 3 seconds.
- When the Green LED signature light illuminates,
- the RF frequency code setting function will be
- Activated.
- When the Green LED signature light illuminates,
- the RF frequency code setting function will be
- activated.
- Press any button on the remote control.
JB-MP-108 Continued…
Fuse
TR-FS-100
The fuse that is in the control module is a slow burn fuse with 1.5 Amp 250 Volts.
External Bluetooth (BTLE)
AM-BT-110
JB-MP-110 CONTROL BOX
** We no longer mfg. 110 control boxes. Anything that is a 110 needs to be converted into a 2208A1/209A1.
Features
- Head and Foot Massage
- Head & Foot Lift
- Extra Lift – Lumbar/Tilt lift.
- Internal BTLE(Bluetooth)
- DEMO MODE/RESET FEATURE
- Has an Internal Power Supply.
- Internal BTLE. Can Connect to the APP.
- There is an Internal Backup Battery in this Control Box that can last for an entire day when unplugged from the wall.
- This base had a DEMO MODE and RESET feature.
JB-MP-110 CONTROL BOX Continued…
Demo Mode
To enter DEMO MODE while the base is plugged in, press the white button on the Control Box for 15 seconds. In DEMO MODE the base will cycle through various functions. Demo Mode will continue for 30 minutes
Reset Feature
Base MUST be unplugged to reset the Control Box
Hold down the white reset button for 15 seconds on the Control Box and the reset will take place
JB-MP-106 CONTROL BOX
Features
- Head and Foot Lift
- Hard Wired Remote.
- A RF Receiver must be used to have a wireless remote. (Next Slide)
- This CB DOES NOT have access to the app
- Cut Date 9/1/2018
- Internal Power Supply
- There is not an indicator light
- 106 Control Boxes have been converted into 206 control boxes as of 9/2018.
JB-MP-106 CONTROL BOX Continued…
AM-RF-113 Radio Frequency Receiver used
JB-MP-106 CONTROL BOX Continued…
Pairing Instructions Remotes to 106 CB
- Press and hold the red button (around 3 seconds)
until the green LED lights up and release the red button.
- Press any button on the remote control. When the
Green LED flashes, the pairing process is completed.
206 CONTROL BOX
206 CONTROL BOX Continued…
Pairing Instructions Remotes to 206 CB
- Ensure the power base is not
plugged into an outlet. Have the
plug and remote ready on hand.
- Plug the control box into an outlet to
start the pairing process. Pairing
mode lasts for the first 5 seconds
once plugged in.
- The control box emits a
clicking sound during the 5
seconds of pairing mode.
- Press and hold any button on
the remote control to pair
Features
- Head and Foot Lift
- Wireless Remote
- Does not have access to the app
- Internal Power supply
- There is not an indicator light
- Makes a clicking noise when plugged in, used to pair remote to CB
Nothing is needed to convert this control box from a 106, the receiver is not used once converted.
OSO CONTROL BOXES/ECB036A01
Features
- Head & Foot Lift Motors
- Does not have access to the app
- Wireless remote
- Red Indicator Light
Pairing Remote Instructions
- Press the pair button on the control
box for 3 seconds.
- The indicator light will begin to flash
rapidly.
- Press any button on the remote control
within 30 seconds to pair successfully.
- When the receiver light stops flashing
and turns solid, you have completed
the learning process of the RF
frequency code.
ECB236A01/ECB236B01/ECB236B02
Features
- Head & Foot Lift Motors
- Massage on 236B01/ECB236B02
- Does not have access to the app
- Wireless remote
- Red Indicator Light
Pairing Remote Instructions
- Press the pair button on the control
box for 3 seconds.
- The indicator light will begin to flash
rapidly.
- Press any button on the remote control
within 30 seconds to pair successfully.
- When the receiver light stops flashing
and turns solid, you have completed
the learning process of the RF
frequency code.
ECB27B01 CONTROL BOX
Features
- Head & Foot Lift Motors
- Head & Foot Massage Motors
- Does not have access to the app
- Wireless remote
- Green Indicator Light
- Has Presets
Pairing Remote Instructions
- Press the pair button on the control
box for 3 seconds.
- The indicator light will begin to flash
rapidly.
- Press any button on the remote control
within 30 seconds to pair successfully.
- When the receiver light stops flashing
and turns solid, you have completed
the learning process of the RF
frequency code.
ECB2207G1/ECB236G01
Features
- Head & Foot Lift Motors
- Head & Foot Massage Motors
- Does not have access to the app
- Wireless remote
- Red/Green Indicator Light
- Has Presets
Pairing Remote Instructions
- Press the pair button on the control
box for 3 seconds.
- The indicator light will begin to flash
rapidly.
- Press any button on the remote control
within 30 seconds to pair successfully.
- When the receiver light stops flashing
and turns solid, you have completed
the learning process of the RF
frequency code.